1.Many kinds of reinforced device is it choose to support, feed in raw material in succession steady,course can produce phenomenon of bridging.
2.Set up the special cooling device in the desiccator bottom, has prevented the supplies from producing the rotten phenomenon in the high-temperature district of the bottom.
3.Special atmospheric pressure seal installation and bearing cool the device, the service life of the running part of effective extension.
4.Special points of wind device, has reduced the obstruction of the equipment, and has offered the wind amount of treatment of the desicator effectively.
1、The organic combination of swirling flow, fluidization, jetting, and crushing classification technologies.
2、Compact equipment, small size, high production efficiency, continuous production, achieving "small equipment, large production".
3、High drying intensity, low energy consumption, and thermal efficiency of over 70%. Energy saving equipment.
4、The material has a short retention time and good finished product quality, making it suitable for drying heat-sensitive materials.
5、Negative pressure or micro pressure operation, good airtightness, high efficiency, and elimination of environmental pollution.
6、This machine is a new type of drying equipment developed by our factory and professional design institutes, on the basis of digesting and absorbing advanced foreign equipment and technology, for drying paste like, filter cake like, and thixotropic, thermosensitive powder like materials. Our factory can conduct drying tests on various materials for users, provide data and assist in selection.
Inorganic: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc.
Organic compounds: atrazine (pesticide insecticide), lauric acid, benzoic acid, benzoic acid, fungicide, sodium oxalate, acetate fiber, etc.
Ceramics: kaolin, silicon trioxide, clay, etc.
Dyes: Anthraquinone, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various intermediate azo dyes.
Food category: soy protein, gelatinized starch, distiller's grains, wheat ponds, wheat starch, etc.
model | Cylinder diameter(mm) | Host size(mm) | Host powerkw) | Processing air volume(m3/h) | Evaporated water volume | Occupied area(m2) |
SXG-2 | 200 | 250×2800 | 0.75~2.2 | 300~800 | 10~20 | 3500×2500 |
SXG-3 | 300 | 400×3300 | 3~4 | 600~1500 | 20~50 | 3800×2700 |
SXG-4 | 400 | 500×3500 | 4~7.5 | 1250~2500 | 25~70 | 4000×3000 |
SXG-5 | 500 | 600×400 | 5.5~11 | 1500~4000 | 30~100 | 4200×3200 |
SXG-6 | 600 | 700×4200 | 7.5~18.5 | 2500~5000 | 40~200 | 4250×3250 |
SXG-8 | 800 | 900×4600 | 11~18.5 | 3000~8000 | 60~600 | 4500×3500 |
SXG-10 | 1000 | 1100×5000 | 15~30 | 5000~12500 | 100~1000 | 4750×3750 |
SXG-12 | 1200 | 1300×5200 | 15~37 | 10000~20000 | 150~1300 | 5000×4000 |
SXG-14 | 1400 | 1500×5400 | 30~55 | 14000~27000 | 200~1600 | 5250×4250 |
SXG-16 | 1600 | 1700×6000 | 45~75 | 18700~36000 | 250~2000 | 5500×4500 |
Note: The evaporation capacity listed in the table is applicable to the inlet air temperature and the evaporation capacity at the outlet air temperature. The above parameters for special materials may vary. |
1.Many kinds of reinforced device is it choose to support, feed in raw material in succession steady,course can produce phenomenon of bridging.
2.Set up the special cooling device in the desiccator bottom, has prevented the supplies from producing the rotten phenomenon in the high-temperature district of the bottom.
3.Special atmospheric pressure seal installation and bearing cool the device, the service life of the running part of effective extension.
4.Special points of wind device, has reduced the obstruction of the equipment, and has offered the wind amount of treatment of the desicator effectively.
1、The organic combination of swirling flow, fluidization, jetting, and crushing classification technologies.
2、Compact equipment, small size, high production efficiency, continuous production, achieving "small equipment, large production".
3、High drying intensity, low energy consumption, and thermal efficiency of over 70%. Energy saving equipment.
4、The material has a short retention time and good finished product quality, making it suitable for drying heat-sensitive materials.
5、Negative pressure or micro pressure operation, good airtightness, high efficiency, and elimination of environmental pollution.
6、This machine is a new type of drying equipment developed by our factory and professional design institutes, on the basis of digesting and absorbing advanced foreign equipment and technology, for drying paste like, filter cake like, and thixotropic, thermosensitive powder like materials. Our factory can conduct drying tests on various materials for users, provide data and assist in selection.
Inorganic: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc.
Organic compounds: atrazine (pesticide insecticide), lauric acid, benzoic acid, benzoic acid, fungicide, sodium oxalate, acetate fiber, etc.
Ceramics: kaolin, silicon trioxide, clay, etc.
Dyes: Anthraquinone, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various intermediate azo dyes.
Food category: soy protein, gelatinized starch, distiller's grains, wheat ponds, wheat starch, etc.
model | Cylinder diameter(mm) | Host size(mm) | Host powerkw) | Processing air volume(m3/h) | Evaporated water volume | Occupied area(m2) |
SXG-2 | 200 | 250×2800 | 0.75~2.2 | 300~800 | 10~20 | 3500×2500 |
SXG-3 | 300 | 400×3300 | 3~4 | 600~1500 | 20~50 | 3800×2700 |
SXG-4 | 400 | 500×3500 | 4~7.5 | 1250~2500 | 25~70 | 4000×3000 |
SXG-5 | 500 | 600×400 | 5.5~11 | 1500~4000 | 30~100 | 4200×3200 |
SXG-6 | 600 | 700×4200 | 7.5~18.5 | 2500~5000 | 40~200 | 4250×3250 |
SXG-8 | 800 | 900×4600 | 11~18.5 | 3000~8000 | 60~600 | 4500×3500 |
SXG-10 | 1000 | 1100×5000 | 15~30 | 5000~12500 | 100~1000 | 4750×3750 |
SXG-12 | 1200 | 1300×5200 | 15~37 | 10000~20000 | 150~1300 | 5000×4000 |
SXG-14 | 1400 | 1500×5400 | 30~55 | 14000~27000 | 200~1600 | 5250×4250 |
SXG-16 | 1600 | 1700×6000 | 45~75 | 18700~36000 | 250~2000 | 5500×4500 |
Note: The evaporation capacity listed in the table is applicable to the inlet air temperature and the evaporation capacity at the outlet air temperature. The above parameters for special materials may vary. |