The Jingjiang Xingguang three drum dryer is a combination of three concentric cylinders with different diameters that are embedded and combined according to a certain mathematical relationship and structural form, using advanced German technology. Widely used in industries such as biomass, non-metallic minerals, chemicals, environmental protection, feed, agriculture, forestry, etc. Specializing in drying waste materials such as wood chips, sawdust, straw, shavings, bark, wood flour, rice husks, grass, oil palm silk, plant fibers, beer lees, cassava residue, ginkgo leaves, marigold, Chinese herbal medicine, alfalfa powder, corn cob, vegetable powder, various crystals, non-metallic mineral powder, inorganic fertilizers, etc. According to user conditions, hot air can be used for reuse, with a thermal efficiency of up to 80%, which is significantly higher than similar drying equipment.
High temperature hot air and wet materials enter the central cylinder together, causing it to rotate and flow along the middle annular channel. Once again, it passes through the outer annular channel to the discharge port of the drying cylinder. The materials in each channel are transported under high-temperature airflow pressure and dried in a suspended state. There are also blades in the channel to carry scattered materials. The tiny particles pass through the dryer at almost the same speed as the air flow. The wetter and heavier materials in the middle and outer annular channels fall from the material flow, but are carried back by the blades due to the rotation of the drying cylinder, returning to the airflow and constantly being surrounded by the drying medium.
Under this movement, the smaller particles are quickly dried and discharged from the drying cylinder. Wet large pieces of crushed material are stored in the drying cylinder for a longer time. This can make the drying of the material more uniform. When hot air flows with materials, strong heat and mass exchange occurs, and the temperature of the drying medium drops to 80-120 ° C at the outlet of the drying cylinder.
Model | Yield(Ton/Hour) | Theoretical water evaporation | Overall dimensions(m) | Installed power | Energy demand | coal consumption |
SG-10 | 1.0 | 700 | 7*2.0*2.7 | 22 | 37*104 | 100 |
SG-15 | 1.5 | 1000 | 9*2.4*2.8 | 38 | 100*104 | 145 |
SG-20 | 2.0 | 1500 | 12*2.4*3.2 | 50 | 150*104 | 215 |
SG-30 | 3.0 | 2100 | 15*3.0*4.0 | 70 | 210*104 | 300 |
SG-40 | 4.0 | 2800 | 15*3.6*4.0 | 100 | 280*104 | 400 |
The main features of the three drum dryer are:
The self insulation thermal efficiency of the cylinder is over 70% (traditional single cylinder drying thermal efficiency is only 30%).
Adopting tail transmission, the transmission is more stable and reliable; Thoroughly changing the rotation of the supporting roller often affects production due to slipping.
Compared to a single drum dryer, it reduces land occupation by about 50%, reduces civil engineering investment by about 50%, and reduces power consumption by 60%.
Multiple combinations of circumferential lifting materials are distributed, effectively regulating the drying time and achieving good drying results.
The desired final moisture index can be easily adjusted according to user requirements.
Adopting variable frequency speed regulation to control material flow, the desired final moisture index can be easily adjusted according to user needs.
The entire system is equipped with a blockage alarm and riot prevention device.
Professional applications:
Based on the three drum dryer, combined with years of industry experience and engineering examples, we can provide a variety of specialized dryers. Such as sawdust dryer, sawdust dryer, cassava residue dryer, particle dryer, wood powder dryer, medium grass dryer, fiber dryer, rice husk dryer, straw dryer, beer tank dryer, marigold dryer, forage dryer, alfalfa dryer, oil palm fiber dryer, mineral powder dryer, etc.
customer site
The Jingjiang Xingguang three drum dryer is a combination of three concentric cylinders with different diameters that are embedded and combined according to a certain mathematical relationship and structural form, using advanced German technology. Widely used in industries such as biomass, non-metallic minerals, chemicals, environmental protection, feed, agriculture, forestry, etc. Specializing in drying waste materials such as wood chips, sawdust, straw, shavings, bark, wood flour, rice husks, grass, oil palm silk, plant fibers, beer lees, cassava residue, ginkgo leaves, marigold, Chinese herbal medicine, alfalfa powder, corn cob, vegetable powder, various crystals, non-metallic mineral powder, inorganic fertilizers, etc. According to user conditions, hot air can be used for reuse, with a thermal efficiency of up to 80%, which is significantly higher than similar drying equipment.
High temperature hot air and wet materials enter the central cylinder together, causing it to rotate and flow along the middle annular channel. Once again, it passes through the outer annular channel to the discharge port of the drying cylinder. The materials in each channel are transported under high-temperature airflow pressure and dried in a suspended state. There are also blades in the channel to carry scattered materials. The tiny particles pass through the dryer at almost the same speed as the air flow. The wetter and heavier materials in the middle and outer annular channels fall from the material flow, but are carried back by the blades due to the rotation of the drying cylinder, returning to the airflow and constantly being surrounded by the drying medium.
Under this movement, the smaller particles are quickly dried and discharged from the drying cylinder. Wet large pieces of crushed material are stored in the drying cylinder for a longer time. This can make the drying of the material more uniform. When hot air flows with materials, strong heat and mass exchange occurs, and the temperature of the drying medium drops to 80-120 ° C at the outlet of the drying cylinder.
Model | Yield(Ton/Hour) | Theoretical water evaporation | Overall dimensions(m) | Installed power | Energy demand | coal consumption |
SG-10 | 1.0 | 700 | 7*2.0*2.7 | 22 | 37*104 | 100 |
SG-15 | 1.5 | 1000 | 9*2.4*2.8 | 38 | 100*104 | 145 |
SG-20 | 2.0 | 1500 | 12*2.4*3.2 | 50 | 150*104 | 215 |
SG-30 | 3.0 | 2100 | 15*3.0*4.0 | 70 | 210*104 | 300 |
SG-40 | 4.0 | 2800 | 15*3.6*4.0 | 100 | 280*104 | 400 |
The main features of the three drum dryer are:
The self insulation thermal efficiency of the cylinder is over 70% (traditional single cylinder drying thermal efficiency is only 30%).
Adopting tail transmission, the transmission is more stable and reliable; Thoroughly changing the rotation of the supporting roller often affects production due to slipping.
Compared to a single drum dryer, it reduces land occupation by about 50%, reduces civil engineering investment by about 50%, and reduces power consumption by 60%.
Multiple combinations of circumferential lifting materials are distributed, effectively regulating the drying time and achieving good drying results.
The desired final moisture index can be easily adjusted according to user requirements.
Adopting variable frequency speed regulation to control material flow, the desired final moisture index can be easily adjusted according to user needs.
The entire system is equipped with a blockage alarm and riot prevention device.
Professional applications:
Based on the three drum dryer, combined with years of industry experience and engineering examples, we can provide a variety of specialized dryers. Such as sawdust dryer, sawdust dryer, cassava residue dryer, particle dryer, wood powder dryer, medium grass dryer, fiber dryer, rice husk dryer, straw dryer, beer tank dryer, marigold dryer, forage dryer, alfalfa dryer, oil palm fiber dryer, mineral powder dryer, etc.
customer site